Specials:  
Site Search   

Gasket Material > Non-Asbestos Sheet > NA1100

                                Compressed Sheet with Carbon Fibers / NBR Binder

Construction
Style NA1100 is a compressed non-asbestos sheet gasket material produced from inorganic fibers,
reinforced filler and bonded with nitrile rubber (NBR). It is manufactured through the hot calendat process
under rigorousquality control standard that are registered under ISO-9001.
Application / Service
Style NA1100 is a general purpose Compressed Non-Asbestos sheet gasket material suitable for
services with the following genereal media categories:
  • Mild inorganic acids
  • Mild organic acids
  • Air
  • Diluted alkalis
  • Water
  • Brine
  • Saturated Steam
  • Industrial gases
  • Animal oils
  • Synthetic oils
  • Vegetable Oils
  • Peroleum and Derivatives
  • General chemicals
  • Neutral solutions
  •  Refrigerants
  • Aliphatic solvents
    
 
Service Limits
Type Description Value
Temperature Limits Maximum 750°F (400°C)
  Continuous Max 480°F (250°C)
Pressure Limits Maximum 1560 psi (70 bar)
  Continuous Max 1140 psi (50 bar)
ASTM Line Call Out F104 F712290E33M4  
Color Black  
Available Sheet Sizes Thickeness 1/64", 1/32", 1/16", 3/32", 1/8"
  Sheet Sizes 59" x 63"
    59" x 126"

 

Typical Physical Properties 

ASTM Test Method  Property  Value
F1315  Density  96 lb/ft3 (1.7 gm/cc)
 F36A  Compressibility  7-17%
 F36A  Recovery  min 45%
 F152  Tensile Strength  1450 psi (10 N/mm2)
 F495  Ignition Loss  max 37%
 F146 Thickness Increase  
 
  •  ASTM Oil IRM903
  
   5h/300°F (150°C) max 20%
 
  • Fuel B, 5h/77°F (25°C)
  max 15%
 F146 Weight Increase  
 
  • ASTM Oil IRM903
  
  5h/300°F (150°C)  max 25%
 
  • Fuel B, 5h/77°F (25°C)
  max 20%
 F38 Creep Relaxation  23%
 DIN 52913 Torque Retention  40 N/mm2
 F37A Sealability at 1000 psi  0,3 mL/h

 

           The P x T graph shown above indicates the service limits for this sheet considering pressure and temperature  simultaneously...
           (Tests were performed with nitrogen on 1.6mm thick sheet). The "normal" curve represents the common usage area for this sheet
            while the "maximum" curve indicates the maximum limits. For applications near or above the "maximum" curve, contact Hanna.

Properties and application parameters shown throughout this datasheet are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations consult Hanna. Failure to select proper sealing products could result in property damage and/or serious personal injury. Specifications are subject to change without notice. This edition supersedes all previous issues.